顔 / 目の追従 (問題の解決)

From Resonite Wiki
Revision as of 07:15, 22 August 2025 by Kazu (talk | contribs) (Created page with "[$1 Meta用Steam Linkのダウンロード]")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Resoniteは以下の端末を利用した顔・目の追従に対応しています:

  • Vive Pro Eye - 目の追従
  • Vive Facial Tracker - 顔の追従
    • この機能を使用するのにViveヘッドセットは必須ではありません。様々な種類のヘッドセットで成功事例が報告されています。
  • Steam Link を経由した Quest Pro

これらのシステムのいずれかで問題が発生している場合は、以下の一般的なアドバイスを参考にしてください。

Hardware

  • Make sure everything is plugged in. If you're unsure unplug and then re-plug all cables. A green or blue light should be present on all items.
  • Check all cables are intact and do not look frayed, damaged or kinked.

For non Vive Pro Eye headsets, you may need a USB-C to USB Adapter. These look like this:

A USB-C to USB Adapter

Face Tracker Mounting

For non-vive headsets, users have been sharing all sorts of mounting options. A short list of these is supplied below for reference.

  • Tape - Lots of tape and the Tracker sticks quite well. Any tape works.
  • Double Sided Velcro Tape - This provides a removable mounting option. Make sure it is heavy duty so it can support the weight of the tracker and the movement of your head.
  • 3D Printing
    • Simple Mount - A simple mount that can be stuck to the bottom of the headset with tape.
    • Friction Mount - A mount that uses friction/clips between the mount and the Valve Index Frunk. This can fail if you are moving your head around too vigorously.

Magnetic Mount - Uses the existing Valve Index Frunk Cover's Magnets to stick to the headset. This one will require magnets with the following dimensions: 1/8" dia. x 1/8" thick. Stuck to the print.

Software

Steam Link

Steam Linkは、対応ヘッドセットの眼球追跡と顔認識の両方をサポートしており、Resoniteでは追加設定なしでそのまま使用できます。

Steam Linkから送信される顔/目に関する情報を Resonite側で受信するポートを変更することができます。Steam Link使用中にResoniteの「設定」>「デバイス」メニューに移動してください。

OSCを使用する他のアプリケーションが動作していないことを確認してください。これらのアプリケーションが干渉する可能性があります。

Meta用Steam Linkのダウンロード

Installing the Software for Vive hardware only.

Both Facial tracking and Eye tracking require the same software from HTC. You can download the software from the HTC Website. Once downloaded please find it within your Start Menu and run it. Once installed and ran it should place an icon in your system tray(the icons to the right side of your taskbar) which look like this:

SRAnipal's System Tray Icon

If this icon appears, tracking will usually be functional.

Tracking Status

The icon(a robot), also communicates the status of the tracking:

  • The Eyes of the robot show the status of Eye Tracking
  • The mouth of the robot shows the status of Face Tracking

The color of the eyes or mouth tell you what is happening:

  • Black means the tracking is inactive
  • Orange means the tracking is idle/standby
  • Green means the tracking is active

About Window

If you right-click the robot icon, you will see a small menu, selecting about will bring up a window. This window will provide addtional information such as:

  • The Software Version
  • The Eye Tracker Version
  • The Face Tracker Version

If N/A is displayed in the Eye Camera or Lip camera portion it means that the software cannot detect your device. see Hardware for some troubleshooting steps.

The current version of the software is: 1.3.2.0. However it is recommended to use 1.3.1.1

Eye Tacking Calibration

The Vive Pro Eye, needs occasional Calibration to detect your eyes as best as it can. See HTC Vive Pro Eye Calibration for how to do this.

Additional Software / Hardware Help

As the Vive Headsets and Facial Trackers are made by HTC, they have their own help sections and support systems. Please see their resources for additional assistance:

Resonite

ソフトウェアとハードウェアの設定が完了したら、Resoniteを起動するだけで問題なく動作するはずです。Resoniteが起動し、初期設定ワールドで動作を開始した後は、以下の手順に従ってください。

If you have Eye Tracking, the Robot Eyes should be green. If you have Facial Tracking, the Robot Mouth should be green.

Now, try equipping a Face/Eye Tracking Compatible avatar.

Issues with Resonite

If your tracking is not working in Resonite. Try:

  • Ensuring the Robot Icon is in your System Tray
  • Restarting Resonite
  • Restarting your Computer
  • Adding -ForceSRAnipal to your Command Line Arguments

If things are still not working. Please grab some logs and ask in #questions-help forum within the Resonite Discord.

Shape Keys and Setup

Once your avatar is working please see the guide on setting up your avatar. TODO: THIS NEEDS TO BE WRITTEN.


This article or section is a Stub. You can help the Resonite Wiki by expanding it.